Aerotech Soloist MP 10, Руководство по оборудованию

Страница: 33 / 94

Installation and Configuration Soloist MP
2.2. Motor Output Connections
The Soloist MP is capable of controlling three motor types:
l
Brushless (see Section 2.2.1. )
l
DC Brush (see Section 2.2.2. )
l
Stepper (see Section 2.2.3. )
For a complete list of electrical specifications, refer to Section 1.2.
Table 2-8: Motor Power Output Connections (TB102)
Pin Description Recommended Wire Size
ØA Phase A Motor Lead
0.5 mm
2
(#20 AWG)
ØB Phase B Motor Lead
0.5 mm
2
(#20 AWG)
ØC Phase C Motor Lead
0.5 mm
2
(#20 AWG)
Earth Ground to Motor (required for safety)
0.5 mm
2
(#20 AWG)
Table 2-9: Mating Connector Part Numbers for the Motor Power Output Connector
Description Aerotech P/N Phoenix P/N
Tightening
Torque (Nm)
Wire Size:
mm
2
[AWG]
7-Pin Terminal Block ECK01389 1803620 0.22 - 0.25 2.0 - 0.516 [14-30]
www.aerotech.com Chapter 2 33