10
Fault Codes
F1 displayed in Tech Select only
Maximum allowable temperature (185°F, 85°C) around the electronics was
exceeded.
Procedure:
·
Check for cooling fan fault or vent blockages.
Fault Code F2 displayed
Maximum allowable cavity temperature was exceeded during Self-Clean Pyro
cycle.
Procedure:
·
Check for temperature sensor faults.
·
Check for oven element faults.
·
Replace the power module if no other component faults can be found.
Fault Code F3 displayed
The oven temperature is sensed at over 600°F (315°C) during normal
cooking operation.
Procedure:
·
Check for temperature sensor fault.
·
Check for oven element faults.
·
Replace the power module if no other component faults can be found.
Fault Code F4 displayed
A fault occurred in the power module.
Procedure:
·
Check all the connections to the power module and clock module.
·
If the fault code re-occurs, then replace the power module.
