Aerotech Ndrive FCL страница 9 Скачать руководство пользователя | Manualshive

Страница: 9 / 52

background image

Electrical Safety

Ndrive FCL

Safety Procedures and Warnings

This manual tells you how to carefully and correctly use and operate the Ndrive FCL. Read all parts of this
manual before you install or operate the Ndrive FCL or before you do maintenance to your system. To
prevent injury to you and damage to the equipment, obey the precautions in this manual. The precautions
that follow apply when you see a Danger or Warning symbol in this manual. If you do not obey these
precautions, injury to you or damage to the equipment can occur. If you do not understand the information in
this manual, contact Aerotech Global Technical Support

This product has been designed for light industrial manufacturing or laboratory environments. The protection
provided by the equipment could be impaired if the product is used in a manner not specified by the
manufacturer.

N O T E :

Aerotech continually improves its product offerings; listed options may be superseded at any

time. All drawings and illustrations are for reference only and were complete and accurate as of this
manual’s release. Refer to www.aerotech.com for the most up-to-date information.

D A N G E R : This product contains potentially lethal voltages. To reduce the possibility of
electrical shock, bodily injury, or death the following precautions must be followed.

1. Disconnect electrical power before servicing equipment.
2. Disconnect electrical power before performing any wiring.
3. To minimize the possibility of electrical shock and bodily injury, extreme care must be

exercised when any electrical circuits are in use. Suitable precautions and protection must
be provided to warn and prevent persons from making contact with live circuits.

4. Do not connect or disconnect any electrical components or connecting cables while

connected to a power source.

5. All components must be properly grounded in accordance with local electrical safety

requirements.

6. Operator safeguarding requirements must be addressed during final integration of the

product.

W A R N I N G : To minimize the possibility of electrical shock, bodily injury or death the
following precautions must be followed.

1. If the product is used in a manner not specified by the manufacturer, the protection

provided by the product can be impaired and result in damage, shock, injury, or death.

2. Moving parts can cause crushing or shearing injuries. Access to all stage and motor parts

must be restricted while connected to a power source.

3. Cables can pose a tripping hazard. Securely mount and position all system cables to avoid

potential hazards.

4. Do not expose this product to environments or conditions outside of the listed

specifications. Exceeding environmental or operating specifications can cause damage to
the equipment.

5. Operators must be trained before operating this equipment.
6. All service and maintenance must be performed by qualified personnel.

www.aerotech.com

9

«
...
7
8
9
10
11
...
»

Содержание Ndrive FCL





















































Отзывы:

Нет отзывов

Похожие инструкции для Ndrive FCL

Бренд: Onyx Страницы: 2

Бренд: Aiwa Страницы: 26

Бренд: Teac Страницы: 74

Бренд: Danfoss Страницы: 12

Бренд: LEGRAND Страницы: 8

Бренд: Fujitsu Страницы: 161

Бренд: Fujitsu Страницы: 175

Бренд: Fujitsu Страницы: 181

Бренд: Fujitsu Страницы: 202

Бренд: Fujitsu Страницы: 199

MBA3300 NP SERIES

Бренд: Fujitsu Страницы: 209

Бренд: Infranor Страницы: 107

Бренд: Toshiba Страницы: 15

Бренд: Toshiba Страницы: 16

Бренд: Toshiba Страницы: 12

Бренд: Toshiba Страницы: 12

Бренд: Toshiba Страницы: 12

Бренд: Toshiba Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды