Aerotech BLMF Series, Руководство пользователя

Страница: 11 / 36

BLMF Hardware Manual Overview
Chapter 1: Overview
N O T E : Aerotech continually improves its product offerings; listed options may be superseded at any
time. All drawings and illustrations are for reference only and were complete and accurate as of this
manual’s release. Refer to www.aerotech.com for the most up-to-date information.
Table 1-1: BLMFx Options
Motor Series
BLMFI-81 81 mm long flat linear motor forcer with thermistor; ironless design for zero cogging
BLMFI-142 142 mm long flat linear motor forcer with thermistor; ironless design for zero cogging
BLMFI-264 264 mm long flat linear motor forcer with thermistor; ironless design for zero cogging
BLMFI-386 386 mm long flat linear motor forcer with thermistor; ironless design for zero cogging
BLMFS-81 81 mm long flat linear motor forcer with thermistor; steel lamination design for higher force
BLMFS-142 142 mm long flat linear motor forcer with thermistor; steel lamination design for higher force
BLMFS-264 264 mm long flat linear motor forcer with thermistor; steel lamination design for higher force
BLMFS-325 325 mm long flat linear motor forcer with thermistor; steel lamination design for higher force
BLMFS-386 386 mm long flat linear motor forcer with thermistor; steel lamination design for higher force
BLMFS5-142 142 mm long flat linear motor forcer; steel lamination design; with HED and temperature
switch
BLMFS5-262 262 mm long flat linear motor forcer; steel lamination design; with HED and temperature
switch
BLMFS5-382 382 mm long flat linear motor forcer; steel lamination design; with HED and temperature
switch
Winding Designation (Required)
-A 76 cm (2.5 ft) flying leads (standard)
-B Optional winding
Hall-Effect Sensors (Required)
-NH No Hall-effect sensors
-H With Hall-effect sensors
Vacuum Preparation (Optional)
-V Vacuum preparation for 10
-6
Torr
-UHV Ultra-high vacuum preparation, contact the factory
Note: Vacuum preparation motors are ordered as an Engineering Special line item
Flat Magnet Tracks (Optional)
MTF240P 240 mm (9.4 in) long flat magnet track for use with a BLMFI or BLMFS forcer
MTF360P 360 mm (14.2 in) long flat magnet track for use with a BLMFI or BLMFS forcer
MTF480P 480 mm (18.9 in) long flat magnet track for use with a BLMFI or BLMFS forcer
MTF#P Custom length flat magnet track
MTF5240P 240 mm (9.4 in) long flat magnet track for use with a BLMFS5 forcer
MTF5420P 420 mm (16.5 in) long flat magnet track for use with a BLMFS5 forcer
MTF5#P Custom length flat magnet track
Note: Magnet tracks are ordered as a separate line item
www.aerotech.com Chapter 1 11