Aerotech Automation1 iXC2e, Руководство по оборудованию

Страница: 66 / 98

3.2. Auxiliary Encoder Interface [-EB1/-EB2]
The Auxiliary Encoder connector gives you a second encoder channel. This channel is typically used
for dual loop applications.
Use the AuxiliaryFeedbackType parameter to configure the drive to accept an encoder signal type.
Square Wave encoder signals: Section 3.2.1.
Absolute encoder signals: Section 3.2.2.
Sine Wave encoder signals (with the -MX3 option): Section 3.2.3.
You can configure the Auxiliary Encoder interface as an output that will transmit encoder signals for
external use. Use the DriveEncoderOutputConfigureInput() function to configure the Sine ± and
Cosine ± connector pins as RS-422 outputs. You can only echo incremental square wave primary
encoder inputs or, with the with the -MX2 or -MX3 option, incremental sine wave primary encoder
inputs.
Table 3-4: Auxiliary Encoder Connector Pinout
Pin# Description In/Out/Bi Connector
1 Auxiliary Marker - Input
2
Auxiliary Bidirectional
Absolute Encoder Clock + Output
3
Auxiliary Cosine- Bidirectional
Absolute Encoder Clock - Output
4
Auxiliary Sine+ Bidirectional
Absolute Encoder Data + Bidirectional
5 Encoder Cable Shield N/A
6 Auxiliary Input
7 +5 Volt (500 mA max) Output
8 Signal Common Output
9
Auxiliary Sine- Bidirectional
Absolute Encoder Data - Bidirectional
Table 3-5: AUX Mating Connector Ratings
Adapter Cable Aerotech P/N Third Party P/N
9-Pin Standard D-style C20931 N/A
25-Pin Standard D-style C20932 N/A
Flying Leads ECZ01343 Molex 83421-9042
9-Pin Micro D-Style (for
a second Auxiliary
Encoder Input)
ECZ03125 N/A
iXC2e/XC2e Hardware Manual
66 www.aerotech.com