Aerotech Automation1 iXC2e, Руководство по оборудованию

Страница: 37 / 98

2.3. Feedback Connector
The connector pin assignment is shown in Table 2-11 with detailed connection information in the
following sections.
Table 2-11: Feedback Connector Pinout
Pin # Description In/Out/Bi Connector
1 Reserved N/A
2 Motor Over Temperature Thermistor Input
3
+5V Power
(1)
Output
4 Plug and Play Serial Data (for Aerotech stages only) Bidirectional
5 Hall-Effect Sensor B (brushless motors only) Input
6
Encoder Marker Reference Pulse - Input
Absolute Encoder Clock - Output
7
Encoder Marker Reference Pulse + Input
Absolute Encoder Clock + Output
8 Absolute Encoder Data - Bidirectional
9 Reserved N/A
10 Hall-Effect Sensor A (brushless motors only) Input
11 Hall-Effect Sensor C (brushless motors only) Input
12 Clockwise End of Travel Limit Input
13 Brake Output - Output
14 Encoder Input
15 Encoder Cosine - Input
16
+5V Power
(1)
Output
17 Encoder Sine + Input
18 Encoder Sine - Input
19 Absolute Encoder Data+ Bidirectional
20 Signal Common Output
21 Signal Common Output
22 Home Switch Input Input
23 Encoder Fault Input Input
24 Counterclockwise End of Travel Limit Input
25 Brake Output
(1) The maximum combined current output is 500 mA.
Table 2-12: Feedback Mating Connector Ratings
Specification 25-Pin Solder Cup Backshell
Aerotech Part Number ECK00101 ECK00656
Amphenol Part Number
(1)
DB25P064TXLF 17E-1726-2
Maximum Wire Size 20 AWG (0.5 mm
2
) N/A
(1) Refer to the manufacturer website for additional information.
Hardware Manual iXC2e/XC2e
www.aerotech.com 37