Aeros Sting Ray, Руководство владельца и по обслуживанию

Страница: 7 / 46

7
4. Turn the wing on one side and spread the control frame down tubes. Install the control bar
according to the markings. Fix the control bar with bolts and nuts so, that fixing nuts are pointing
backwards, against the direction of flight (fig.6).
Figure 6 Figure 7
5. Lift the wing upright on the control frame (fig.7).
Figure 8
6. Spread the wings approximately 50% from fully
open. Attach the struts according to the markings.
L-left, R-right marks must be on the control frame
side of the struts, on top. Attach the upper part of
the strut first, together with the strut safety wire
(fig. 8). Tighten the nut and secure with a safety
ring (fig. 9). Attach the strut to the control frame
bracket. The clevis pin head should be pointing
forward (fig. 10). Do not attach the strut safety
wire to the base tube for now.
Figure 9 Figure 10