Aeros Sting Ray, Руководство владельца и по обслуживанию

Страница: 17 / 46

17
Figure 48 Figure 49
Figure 50
Along the trailing edge, left wing:
Check that there are no tears in the sail material along
the trailing edge.
Check that all battens are properly secured.
Check that the inboard and outboard sprogs are
properly secured in their position supporting the
appropriate transverse battens.
Make sure all zippers are closed.
From the rear keel:
Check that the keel mount webbing and bottom rear
wires are safely secured to the keel tube (fig. 50).
Check the rear wires cables making sure there are no
kinks or twisted thimbles.
Under the wing at the control frame apex:
Check that the cross bar tensioning cables are tight, there are no kinks or twisted thimbles, no
signs of wear and make sure that they are secured to the hook on the keel tube.
Check the control frame apex and the hang block bracket hardware. Check the wing to the trike
attachment, the back up loop attachment, the trim mechanism attachment, the rescue system
bridle attachment (fig. 51).
Figure 51 Figure 52