10
Figure 15
Figure 16
16. The next step is to install the outboard sprogs. To do so swing the sprog away from the leading edge
and push it towards the leading edge in to the receptacle (fig. 17). Make sure the sprog sits all the way in
the sprog receptacle.
Figure 17
Figure 18
Figure 19
17. Install the hang bracket (fig. 18).
18. After the wing is attached to the trike install
the nosecone, which is attached to the front part
of the keel tube with the string (fig. 19).
WARNING
DO NOT FLY WITHOUT THE NOSECONE!
5. PREFLIGHT PROCEDURE
Conduct a complete preflight inspection of the wing, checking all assemblies, which have not already
been checked. Every bolt, nut, pin, safety ring, and fastener of any kind should be checked during every
pre-flight. A full pre-flight inspection should precede every flight you make, not just the first flight of the
day.
