18
Figure 26
Figure 27
6. Detach the main hang loop from the back-up hang loop (fig. 27 and fig.28). Remove the king post from
the hang loop and from the king post channel (fig. 29).
Figure 28
Figure 29
7. Unscrew appropriate carabiners and detach the sweep wire and the upper rear wire from rubber cords
(fig. 30).
Figure 30
Figure 31
8. Unbolt the crossbar from the leading edge tube. Remove the crossbar ends from the sail. Slide the
crossbar central joint along the keel tube towards the nose plate.
9. Detach washout bridles from the front wire bridle (fig. 31).
10. Slide the frame out of the sail. If you encounter resistance, stop and find out what is hanging up.
11. Fold the sail along its leading edge carefully. Put the sail in the glider bag, making sure the wider part
