Aeropro RP17411 Скачать руководство пользователя страница 4



Disconnect the assembly power tool for threaded fasteners from the energy supply before changing the inserted 
tool or accessory. 

Do not touch sockets or accessories during impacting, as this increases the risk of cuts, burns or vibration injuries. 

Use only sizes and types of accessories and consumables that are recommended by the assembly power tool for 
threaded fasteners manufacturer. 



Use only ratchet-wrench-rated sockets in good condition, as poor condition or hand sockets and accessories used 
with ratchet wrenches can shatter and become a projectile. 

Workplace hazards 

The following apply. 



Slips, trips and falls are major causes of workplace injury. Be aware of slippery surfaces caused by the use of the 
tool and also of trip hazards caused by the air line or hydraulic hose. 

Proceed with care in unfamiliar surroundings. Hidden hazards, such as electricity or other utility lines, can exist. 

The assembly power tool for threaded fasteners is not intended for use in potentially explosive atmospheres and is 
not insulated against coming into contact with electric power. 



Make sure there are no electrical cables, gas pipes, etc., that can cause a hazard if damaged by use of the tool. 

Dust and fume hazards

 

Dust and fumes generated when using assembly power tools for threaded fasteners can cause ill health (for 
example, cancer, birth defects, asthma and/or dermatitis); risk assessment and implementation of appropriate 
controls for these hazards are essential. 

Risk assessment should include dust created by the use of the tool and the potential for disturbing existing dust. 

Direct the exhaust so as to minimize disturbance of dust in a dust-filled environment. 



Where dust or fumes are created, the priority shall be to control them at the point of emission. 



All integral features or accessories for the collection, extraction or suppression of airborne dust or fumes should be 
correctly used and maintained in accordance with the manufacturer's instructions. 



Use respiratory protection in accordance with employer's instructions and as required by occupational 
health and safety regulations. 

Noise hazards 



Unprotected exposure to high noise levels can cause permanent, disabling, hearing loss and other problems, such as 
tinnitus (ringing, buzzing, whistling or humming in the ears). 

Risk assessment and implementation of appropriate controls for these hazards are essential. 

Appropriate controls to reduce the risk may include actions such as damping materials to prevent workpieces 

from “ringing”. 



Use hearing protection in accordance with employer's instructions and as required by occupational health and 
safety regulations. 



Operate and maintain the assembly power tool for threaded fasteners as recommended in the instruction handbook, 
to prevent an unnecessary increase in noise levels. 



If the assembly power tool for threaded fasteners has a silencer, always ensure it is in place and in good working 
order when the assembly power tool for threaded fasteners is operating. 



Select, maintain and replace the consumable/inserted tool as recommended in the instruction handbook, to prevent 
an unnecessary increase in noise. 
 

Vibration hazards 



Exposure to vibration can cause disabling damage to the nerves and blood supply of the hands and arms. 



Keep the hands away from the nutrunner sockets. 



Wear warm clothing when working in cold conditions and keep your hands warm and dry. 

Содержание RP17411










Отзывы: