4
Dust Extractor A302
The risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure to these chemicals: work in a well ventilated area, and work with approved
safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Wash hands after handling.
Description
The AEROPRO A302 dust extractor is designed for use as specified for the aspiration and evacuation of non-noxious dusts,
dirt, sand, shavings etc. This dust extractor is designed as specified for vacuuming water. This dust extractor is designed
for household, commercial or both use. More information can contact with
1. IC controlled automatic start and stop, easy operation and energy saving. Comply with national environmental
protection standards, built-in integrated module
Block design, full-life design and use.
2. Unique water filtration design, zero discharge after vacuuming. Give you a clean working environment.
3. 1600W high-power turbocharged motor with strong suction power makes the dust collection effect reach the best
state.
4. The high-tech fully automatic electrical control system, the motor speed can be adjusted arbitrarily according to your
own needs, and the unique electrical
Dynamic and pneumatic synchronization function
5. The unique back-blowing cleaning function can keep the machine's strong suction power all the time.
6. Stepless motor adjustment, pneumatic grinding machine, automatic activation and delayed shutdown function.
7. The unique blowing function can quickly dry the atom and the car body after water milling, which is convenient and
quick
8. The grinding machine has low air consumption, high speed, light weight, low noise, more guaranteed quality, and
higher cost performance.
9. Two-hole design, two grinders can be used at the same time.
Technical Data
Dust Extractor
Model No:A302
Voltage:220V /50Hz
Power: 1600W
Vacuum:
＞
18kpa
Noise:
＜
78dB
Capacity: 30L
Length of Hose:5m
6"150mm Air Sander
ModelNo.AP7336S
Free Speed Rpm:10,000
SandingPad:6"
EccentricDrbit:5mm
AirInlet:1/4"
AirHose(ID):3/8"
Avg.AirConsumption:4.5cfm
Max Working Pressure:90PSI
