![AeroPilates 55-4287 Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/aeropilates/55-4287/55-4287_owners-manual_2862775013.webp)
The safety and integrity designed into the
AeroPilates® Reformer 287
can only be maintained when the
AeroPilates® Reformer 287
is regularly examined for damage and wear. Special attention should be
given to the following:
STORAGE
MAINTENANCE
13
1. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
2. Worn or damaged components must be replaced immediately or the
AeroPilates® Reformer 287
should be removed from service until repair is made.
3. Verify that the
CAUTION LABEL(50)
is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement
CAUTION LABEL(50)
if it is missing or damaged.
4. Verify that the
ROPES(18)
are properly installed on the
PULLEY SETS(22).
5. Check the condition of the
ROPES(18)
and replace if they are frayed or worn.
6. Check the
TENSION CORDS(10).
If any of the
TENSION CORDS(10)
are stretched and loose, re-tie
the knot on the end of the cord. Replace
TENSION CORDS(10)
that are frayed or worn.
7. Check the
PULLEY SETS(22)
for excessive wear. Replace worn
PULLEY SETS(22).
8. Check the
HAND/FOOT STRAPS(20)
for damage. Replace damaged parts.
9. Check the
FOAM SLEEVE(6)
and
FOAM PADS(17)
and replace if damaged or worn.
10. Check the
STOP PLATES(27)
for looseness or damage and replace any damaged parts.
11. Check the
CUSHION(14)
and replace if it is damaged or worn.
12. Check and clean the
ROLLERS(8)
and the rolling surfaces on the rails. Clean by wiping with a dry
cloth.
13. Only Stamina Products supplied components should be used to maintain/repair the
AeroPilates®
Reformer 287.
14. Keep your
AeroPilates® Reformer 287
clean by wiping it off with an absorbent cloth after use.
1. To store the
AeroPilates® Reformer 287
,
simply keep it in a clean dry place.
2. The
FRONT FRAME(1)
of the
AeroPilates® Reformer 287
has built-in
WHEELS(24)
for easy
moving. To move, be sure at least one of the tension cords is attached to prevent the
CARRIAGE(7)
from sliding, then lift from the end of the
REAR FRAME(2)
and roll.
3. The
AeroPilates® Reformer 287
folds for storage. To fold, be sure no tension cords are attached
and slide the
CARRIAGE(7)
to the end of the
REAR FRAME(2)
. Remove the
FOOTBAR(5)
and
FOAM PAD ASSEMBLIES(17)
, then lift the
AeroPilates® Reformer 287
onto its side with the
LOCKING PIN(26)
side up. With the machine hinging in the middle, move the
FRONT FRAME(1)
toward the
REAR FRAME(2)
until the frame ends meet. Insert the
LOCKING PIN(26)
into the hole in
the
REAR FRAME(2)
, and the
AeroPilates® Reformer 287
is ready to store.
!
CAUTION
Keep hands clear of the hinge when folding and unfolding the unit.
Содержание 55-4287
Страница 16: ...PRODUCT PARTS DRAWING 16 FRONT BACK ...