76
77
78
74
75
72
73
69
70
71+67
79
81
80
46
93
124
248
23
24
Thread the railing stanchions (79) onto the lower rails (80) and the handrail
(81), bending all three rails at the same time. Insert the railing stanchions in
the holes in the engine room roof. Position the railing components carefully
before gluing the rails to the stanchions.
Allow these assemblies to dry before removing and painting them
The mast (72)
If you wish to fit working lights, drill 2 mm Ø holes in the mast below the lamp brackets for
the wires to pass through.
Glue the platform supports (75) and the lamp platforms (74) to the mast at the locations
shown in the illustration.
The mast can now be painted.
Paint the upper and lower parts of the lamps (76 + 77) black.
When the paint is dry, glue the clear lenses (78) between them.
When the mast is complete, slip it through the holes in the wheelhouse roof, the floor and
the engine room deck, and secure it by fitting the collet (73) at the bottom.
The wheelhouse as a whole is prevented from rotating by the railings, and is held in position
by the mast collet. If you wish, the wheelhouse can be secured with a small woodscrew
fitted from the underside.
