30
30.2
31
31
32
32
30.1
89
29
28
28
27
27
33
33
33
33
33
33
35
15
16
17
34
34
36
37
Assemble the rear hatch components (27, 28, 29)
and glue the joints.
Assemble the parts of the engine room (30, 31,
32, 30.1) and glue the joints, taking care to
position the roof (32) correctly; note the location
of the holes (see arrows).
Remove any rough edges from the inside edges
of the engine room side panels (30, 31), as this
guarantees a firm seating, and makes it easier to
fit and remove the whole wheelhouse. Glue the
portholes (88) in place as shown.
Prime and paint this assembly.
Bulwark
Insert the bulwark stanchions (33) in the slots in the deck, but do not glue them. Glue the stern bulwark 35 to the
bulwark stanchions. Glue the side bulwarks (34) to part (35) at the stern as well as to the side stanchions (33). Sand
the corner fillets to fit, and glue them in place as shown. When the glue is dry, sand the corners of the bulwark to a
rounded shape. Finally glue the handrail on top.
The bulwark can now be painted.
