7
Connections
AC Power Connection
It is essential that the phono amplifier be connected to wall AC power recepta-
cle, or a similar heavy-duty source. If it is connected to convenience receptacles
on preamplifiers, etc., the full sonic capabilities of both the LP-X1 and the
preamplifier will be compromised.
For the very best sonic performance, the LP-X1 should be connected to its own
AC power circuit branch, protected by a over 5 amp breaker. The other audio
equipment should be connected to a different power circuit and breaker. Avoid
the use of extension cords. If they must be used on a temporary basis, use
High quality power cords.
The LP-X1 utilizes a compatible grounding system that generally does not re-
quire a “ground lifter” adapter plug on the AC power cord to minimize hum. The
power cord supplied with the LP-X1 has a standard three-prong grounding plug
to provide maximum safety when it is connected to a grounded wall receptacle.
If there is any question regarding the safety of grounding procedures, be certain
to seek competent help with the installation.
Rear Panel Connections
All two sets of Single-Ended input, one set of mm phono input and one set of mc
phono input are clearly marked to indicate use.
One set of Single-Ended output and connect to integrated amplifier or pre-
amplifier line-level input (e.g.: AUX, Line 1)
GND is used for phono grounding only! Please do not connect to power socket
grounding.