Aerohive AP350, Руководство пользователя

Страница: 17 / 24

AP330 and AP350 User Guide 17
M
OUNTING THE
AP330
OR
AP350
M
OUNTING THE
AP330
OR
AP350
Using the mounting plate and track clip, you can mount the AP330 or AP350 to the tracks of a dropped
ceiling grid. Using just the mounting plate, you can mount the AP to any surface that can support its weight
(AP330: 1.5 lb., 0.68 kg; AP330: 2.375 lb. (1.08 kg)).
Ceiling Mount
To mount the AP330 or AP350 to a track in a dropped ceiling, use one of the two rail mounts that ship with
the product, depending on whether the ceiling track is flush with the ceiling tiles or recessed:
•
15/16" flush ceiling rail mount
• 15/16" recessed ceiling rail mount
If necessary, nudge the adjacent ceiling tiles slightly away from the track to clear some space. Attach the
appropriate rail mount to the track, drill a hole in the ceiling tile, and then attach the power and Ethernet
cables to the AP, as shown in
Figure 8 .
Figure 8 Attaching the rail mount to a ceiling track
With the AP upside down, align the two flexible V-shaped tabs and the security tab extension on the rail
mount with the two tab slots and the security screw cavity on the underside of the AP, and then push the AP
upward until it clicks into place as shown in Figure 9 on page 18 .
For narrower tracks, you can order a pair of 9/16" rail mounts from Aerohive
(AH-ACC-9-16-CLIP-330-AP350). One rail mount in the pair is flush and the other is recessed.
You can slide the rail mount along the ceiling track if you need to adjust its location.
Press the rail mount against the ceiling track so that the track contacts
the two pressure tabs and pushes them flush with the rail mount.
(Bird’s eye view with the ceiling tiles
removed and the ceiling track
shown as transparent for clarity)
Rotate the rail mount until the two pressure
tabs click into place, gripping the ceiling track
.
2
In the open space not covered by the L-shaped
rail mount, drill a hole in the ceiling tile (not
shown). Then pass one or both Ethernet cables
through the hole, and if you plan to supply
power from an AC power source rather than
through PoE, pass the power cable through as
well. Finally, connect the cables to the AP.
3
1
Rail mount
Ceiling track
CLICK!
CLICK!