The pin-to-signal mapping for the Console port is shown in
"Aerohive Device Pin Assignments"
.
Hardware Specifications
The following specifications describe the physical features and hardware components, PoE electrical
requirements, and the temperature and humidity ranges in which the devices can operate.
Device Specifications
• Chassis dimensions: WxDxH" 4.2" x 1.1" x 6.9" (105.9 mm x 29.2 mm x 175 mm)
• Weight: Device - 0.86 lb (0.39 kg), wall bracket - 0.26 lb (0.1 kg)
• Antennas:
• Two integrated single band 2.4-2.5 GHz omnidirectional antennas
• Three integrated single band 5.1-5.8 GHz omnidirectional antennas
• One BLE internal antenna
• Interfaces:
• Eth0 / POE Input: Autosensing 10/100/1000 Base-
‐
T Ethernet POE Input Port
• Eth1 / PoE Output: Autosensing 10/100/1000 Base-
‐
T Ethernet PoE Output Port
• Eth2 / Eth3: 2x Autosensing 10/100/1000 Base-
‐
T Ethernet Port
• Passive PASS THRU connection : Two RJ45 ports (from the back of the AP to the
bottom)
• Built-in BLE and Zigbee (future use)
• RJ45 Console Port
• AC power input connector (48 VDC, 0.75 A power supply sold separately)
Power Specifications
• IEEE 802.3af PoE input: Typical 11.3 W, maximum 12.4 W
• IEEE 802.3at PoE input: Typical 23.6 W, maximum 24.9 W
• 802.3af PoE-capable Gigabit Ethernet port
• PoE nominal input voltages: 48
Environmental Specifications
• Operating temperature: 32° to 104° F (0° to 40° C)
• Storage temperature: -40° to 158° F (-40° to 70° C)
• Relative Humidity: 5 to 95% RH (noncondensing)
Regulatory Compliance Statements
The regulatory compliance statements in this section apply to AP150W devices.
For Japan,
the
AP150W
is restricted for indoor use in the 5150-5350 MHz band only.
Page 11 of 17
AP150W Hardware User Guide
8/21/2017
Preliminarty
Draft
