AEROCOMPACT CompactPITCH XT, Руководство по сборке

Страница: 23 / 26

X
T
Assembly
www.aerocompact.com 23
Mount the modules row by row.
Tighten the screws of the end-clamps with 15 Nm or 11 ft-lb.
Reposition / replace clamps
Demount clamp: Unscrew the screw at the clamp completely.
Depending on the mounting situation, squeeze the clamp laterally and pull it out or pull it laterally out of
the rail.
Bonding
For bonding, AEROCOMPACT provides the bonding wire clamp as an accessory (NOT
VALID IN THE USA). These are each mounted on the support rails.
Depending on the installation, the module rows are connected to each other by the module clamps.
Exemplary representation
Bonding modules through module clamps
Bonding the individual module rows
Grounding the array by terminating to on-site ground
Attach the T-Bolt Assembly to the rail.
Place the grounding wire onto the rails.
Attach the clamp and tighten with the nut.
Tighten the nut with 15 Nm or 11 ft lb.
Connect the wire
to the on-site ground.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+