AeroComm AC4424, Руководство пользователя

Страница: 17 / 43

5 5 5 5////8/2007 8/2007 8/2007 8/2007 17 17 17 17
0 = Use Destination Address
1 = Automatically set Destination
to Server
Bit 3 – AeroComm Use Only AeroComm Use Only AeroComm Use Only AeroComm Use Only
Bit 2 – RTS Enable
0 = RTS Ignored
1 = Transceiver obeys RTS
Bit 1 – Duplex Mode
0 = Half Duplex
1 = Full Duplex
Bit 0 – Auto Config
0 = Use EEPROM values
1 = Auto Configure Values
Parameter
Parameter Parameter
Parameter
EEPROM
EEPROM EEPROM
EEPROM
Address
Address Address
Address
Length
Length Length
Length
(Bytes
(Bytes (Bytes
(Bytes
)))) Range
Range Range
Range Default
Default Default
Default Description
Description Description
Description
Transmit
Retries
4CH 1 01 - FFh 10h Maximum number of times a packet is
sent out when Addressed packets are
selected.
Broadcast
Attempts
4DH 1 01 – FFh 04h Maximum number of times a packet is
sent out when Broadcast packets are
selected.
API Control 56H 1 01000011
b = 43h
Settings are:
Bit 7 – AeroCo
AeroCo AeroCo AeroComm Use Only mm Use Only mm Use Only mm Use Only
Bit 6 – RF Architecture
0 = Server-Client
1 = Peer-to-Peer
Bit 5 – AeroComm Use Only AeroComm Use Only AeroComm Use Only AeroComm Use Only
Bit 4 – Auto Destination
0 = Use Destination Address
1 = Automatically set Destination
to Server
Bit 3 – AeroComm Use Only AeroComm Use Only AeroComm Use Only AeroComm Use Only
Bit 2 – RTS Enable
0 = RTS Ignored
1 = Transceiver obeys RTS
Bit 1 – Duplex Mode
0 = Half Duplex
1 = Full Duplex
Bit 0 – Auto Config
0 = Use EEPROM values
1 = Auto Configure Values
Interface
Timeout
58H 1 01 – FFh F0h Specifies a byte gap timeout, used in
conjunction with RF Packet Size to
determine when a packet coming over
the interface is complete (160 us per