Aerobotics AeroHawk, Руководство по эксплуатации самолета

Страница: 6 / 15

Pre-Flight Assembly
Once you have unpacked the AeroHawk, the following steps will guide you through the simple assembly
procedure so that you can be flight-ready in under five minutes.
3. Connect the wings by sliding the carbon fibre rod
into the corresponding holes in the wings.
4. Connect the two servo cables from the wing to the
two servo cables in the upper compartment of the
body. Either male cable can go into either female
cable, but make sure that the wire colours line up
(Note: in select models, the white wires line up to
the orange wires, and black to brown).
White
wires
lining up
!