SECTION 8
“AERO” Sp. z o.o.
SERVICING
AT-3 R100
Page 8-10
JUNE, 2010
AEROPLANE FLIGHT MANUAL
8.5. Cleaning and basic maintenance
It is essential for the reliability of the aeroplane components to always
keep them clean.
8.5.1. External painted surfaces
Prior to cleaning, take the following steps:
- Protect the wheels, especially the brake discs, covering them.
- Put the cover on the pitot and static pressure sensors.
- Mask off all holes and orifices.
Use clean water to remove all fine particles and then wash the surface
with water adding mild soap. Do not use detergents or soaps which are
acid, alkaline or abrasive.
To remove spots of grease or oil, use a piece of cloth with naphtha or
aliphatic petrol.
After use of naphtha the surface should be re-waxed and polished.
To polish the painted surfaces, a soft cloth or chamois leather should be
used. Aged painted surfaces may be treated with automotive waxes or
good quality polishing compounds.
9