32
4238010_00 - 0912
11.6.
SETTING THE EXTRACT FAN SPEED
During manual mode the extract fan speed is activated at the speed set by parameter PO2. This parameter can be set varying
from the minimum speed (which corresponds to an air flow rate of 150 m3/h) up to the maximum speed (which corresponds to
an air flow rate of 350 m3/h), with 20 intermediate control steps.
To set this parameter it is necessary to see the “extract fan menu” (accessed through the procedure detailed in paragraph 5.4),
by pressing the key MODE/SELECT to enter into modification mode (such a mode is shown by the flashing of the fan icon) and
entering the desired value using the navigation keys and confirming the value by pressing the MODE/SELECT key again.
Flashing of this icon shows that the modi-
fication mode of the fan speed is active
Activate fan modification
mode
Set fan speed
Confirm fan speed
1
2
3
Extract fan menu:
Each press of the navigation keys increas-
es or decreases the extract fan speed
1
2
3
After having confirmed the value the extract fan operates at
the speed set for this parameter during MANUAL mode opera-
tion
