Aeris F11, Руководство по эксплуатации

Страница: 3 / 36

3
F11 OPERATING MANUAL
© 2002 Design, 2013 Doc. No. 12-7285-r01 (5/3/13)
INITIAL ACTIVATION
AERIS Watch type dive gauges are placed in a Deep Sleep mode prior to being shipped from the factory. The intent is to extend
storage life of the Battery for up to 7 years, before the unit is initially placed in service.
In this mode, Date and Time are updated as they normally would be. However, they are not displayed. Upon waking the F11 up, the
correct Date and USA Pacific Time will be displayed and it will be ready to operate with full functions.
To wake the F11 up from Deep Sleep mode, simultaneously depress the upper/right (S) and lower/left (A) buttons for 2 seconds until
the display comes full ON displaying the MAIN TIME screen, then release them.
Once the F11 is brought out of the Deep Sleep mode, it can only be placed back in it by the factory.
FULL LCD
Components:
a. Mode (M) Button
b. Select (S) Button
c. Light (L) Button
d. Advance (A) Button
e. LED Warning Light
f. Icon - Surface Interval Time
g. Icon - Dual Time
h. Icon - Log Mode
i. Icon - Minutes or Seconds
j. Icon - Countdown Timer
k. Icon - Maximum Depth
l. Icon - Time Am/Pm
m. Icon - Depth
n. Icon - Daily Alarm set
o. Icon - Degrees (Temp)
p. Icon - Low Battery
q. Icon - Elapsed Dive Time
b
c
d
e
a
f
g
h
i
j
k
l
i
n
i
o
m
p
q