manualshive.com logo in svg

Aeris ATMOS 2, Руководство по эксплуатации

Поделиться
Скачать
Aeris ATMOS 2 Скачать руководство пользователя страница 77

77

•  Press and release the Select (Side) button to toggle between ON

and OFF.

•  Press and release the Advance (Front) button to accept the set-

ting and advance to DEMO: NI-O2 with CUR (or NEW) flash-

ing (Fig. 77).

     When set for NEW, calculations are based on zero residual ni-

trogen and oxygen loading (a clean dive).  When set for CUR,

calculations take into consideration any calculated residual ni-

trogen and oxygen remaining from previous 'actual' dives.  Sub-

sequent (repetitive) Simulated dives will not take into consider-

ation data from previous Simulated dives.

•  Press and release the Select (Side) button to toggle between

NEW and CUR.

•  Press and release the Advance (Front) button to accept the set-

ting and advance to Demo Surface Mode with the DEMO

graphic flashing (Fig. 78).

•  Press and release the Advance (Front) button to advance to

DEMO: FO2 with Air (or a numerical value) flashing (Fig. 79).

•  Press and release the Select (Side) button to advance the FO2

setting from AIR to 21 through 50, in increments of 1%.

•  Press and release the Advance (Front) button to accept the set-

ting and revert to Demo Surface Mode with the DEMO icon

flashing.

Fig. 77 - Set Demo Calibration

Fig. 79 - Set Demo FO2

Fig. 78  - Demo Surface Mode

Содержание ATMOS 2

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды