Aerial HF2 Series, Инструкция по эксплуатации

Страница: 8 / 17

CONSTRUCTION
Page 5 of 11
3 Construction
Fig. 1: HEPA Filter series HF2 - overview
1
Outlet side connection pipe
Ø38 mm/Ø50 mm or Ø50 pipe
3 Tension lock
2
Intake side connection pipe
Ø38 mm/Ø50 mm or Ø50 pipe
not shown: screw cap
The housing with the prefilter and the HEPA filter installed is ready for
connection. The HEPA filter HF2 has no separate fan, and is used exclusively in
connection with a side channel compressor or the noise box VP2/VP3 or a similar
device, and a water separator VT2 or a similar device. On the intake side the
HEPA filter HF2 is installed between side channel compressor (noise box) and
water separator.