Aerial GTWY Series, Руководство оператора

Страница: 9 / 27

Operator’s Manual
GTWY SERIES 7
Pre-operation Inspection
Do Not Operate Unless:
0 You learn and practice the principles of safe
machine operation contained in this
operator’s manual.
1 Avoid hazardous situations.
2
Always perform a pre-operation
inspection.
Know and understand the pre-operation
inspection before going on to the next
section.
3 Always perform the function tests prior to
use.
4 Inspect the workplace.
5 Only use the machine as it was intended.
Fundamentals
It is the responsibility of the operator to perform
a pre-operation inspection and routine
maintenance.
The pre-operation inspection is a visual
inspection performed by the operator prior to
each work shift. The inspection is designed to
discover if anything is apparently wrong with a
machine before the operator performs the
function tests.
The pre-operation inspection also serves to
determine if routine maintenance procedures
are required. Only routine maintenance items
specified in this manual may be performed by
the operator.
Refer to the list following and check each of the
items.
If damage or any unauthorized variation from
factory delivered condition is discovered, the
machine must be tagged and removed from
service.
Repairs to the machine may only be made by a
qualified service technician, according to the
manufacturer's specifications. After repairs are
completed, the operator must perform a
pre-operation inspection again before going on
to the function tests.
Scheduled maintenance inspections shall be
performed by qualified service technicians,
according to the manufacturer's specifications
and the requirements listed in the
responsibilities manual.
Pre-operation Inspection
□ Be sure that the manuals are
complete, legible and in the storage
container located on the platform.
□ Be sure that all decals are legible and in
place. See Decals section.
□ Check for battery fluid leaks and proper
fluid level. Add distilled water if needed.
See Maintenance section. (DC models)
□ Check for hydraulic oil leaks and proper oil
level. Add oil if needed. See Maintenance
section.
Check the following components or areas for
damage, improperly installed or missing parts
and unauthorized modifications: