Aerial AMH 100, Руководство по эксплуатации

Страница: 29 / 32

EN A – 11
Problem Possible cause Solution
The device
creates noises
and vibrates
The device is not on a
level surface
Place the device on a flat surface
The device
creates noise, is
warm and filters
air poorly
The airflow is disturbed Check that the vents have
sufficient distance from any walls
and dirt, check the conditions of
use and if necessary clean the air
vents
The air filter is dirty Check the air filter for dirt. If
necessary, replace the filter with a
new one.
*
If these points do not lead to the solution of the problem, contact your dealer or
the manufacturer.
9 Decommissioning, Storage And Disposal.
Decommissioning
CAUTION
There is a risk of infection through contaminated filters!

Insert over-used filter into a sealable plastic bag, than seal
and dispose.

Exchange the filter before longer periods of not usage of
the device

When disposing the filter use protection gloves and a
facemask (P2).
If the device is not functioning for longer periods of time, it may temporarily
be out of service. If so, proceed as following:
1. Switch off the device at the on/off switch (Fig. 2, Pos. 3).
2. Pull out the power cord.
3. Make sure there are clean filters within the device.
4. Cover the device with a cloth if necessary to protect from any dust.