Aerial AMH 100, Руководство по эксплуатации

Страница: 27 / 32

EN A – 9
Proceed as followed:
1. Switch off.
2. Disconnect the power cord.
3. Open the snap locks (Fig. 3, Pos. 1).
4. Pull the pre-filter out of the device (Fig. 3, Pos. 4).
5. Thoroughly clean the rear side of the casing with a mild detergent and give
time to dry (Fig. 3, Pos. 2),
6. Visual Inspection: Check the pre-filter for pollution. If necessary use a new filter
of the same class (Fig. 3, Pos. 5) and push in rear of the casing in the direction
of the air as indicated (Fig. 3, Pos. 3) be cautious when doing so.
Fig. 4: Changing The Main Filter
1 Air Direction 3 Main Filter
2 Filter Class Name 4 Air Filter AMH 100
7. Pull the Main Filter (Fig. 4, Pos. 3) out of the device (Fig. 4, Pos. 4).
8. Clean the Device inside and outside with a mild detergent and allow time to
dry.