Aerial Aerocube VT2 Series, Инструкция по эксплуатации

Страница: 13 / 20

MAINTENANCE AND SERVICE
Page 11 of 15
Drain residual water
Fig. 6: AERIAL water separator VT2, drain plug for residual water
1 Drain plug for residual water

In case of longer periods without operation the residual water in the device must
be discharged. To do so turn out the drain plug (s. fig. 6, item 1). Tilt and move the
housing to and fro so that the residual water can flow out.
Clean coarse filter
Fig. 7: Filter box with filter grille Fig. 8:Filter grille removed
1, 3 Knurled nuts 1 Intake openings
2 Filter grille 2 Filter box inside

Release tension locks (s. Fig. 1, item 4) and open cover.

Release knurled nuts; remove and clean filter grille.

Remove fluff, insulation material particles and fibres from the inside of the box.

Insert filter grille, tighten knurled nuts, close cover, tighten tension locks.