27
SKY-SDR USER MANUAL Ver. 1.3.1 - 28-MAR-2017
SERVICE MODE Continued:
Filter AM
Adjusts the bandwidth of the first three AM filters. The
range is 2000 Hz to 9600 Hz. Select filter to be adjusted by
pressing the “Filter” button. Pressing the FILTER Button
toggles through filters 1, 2, & 3. Note: Filter 4 is adjusted
within the normal menu mode (not in service mode).
Filter FM
Adjusts the bandwidth of the first three AM filters. The
range is 2000 Hz to 9600 Hz. Select filter to be adjusted by
pressing the “Filter” button. Pressing the FILTER Button
toggles through filters 1, 2, & 3. Note: Filter 4 is adjusted
within the normal menu mode (not in service mode).
AGC DSP
(On/Off) AGC should always be set to "ENABLE"
SHOW S METER
Switches S-Meter
FILTER TX SSB
Adjustment of transmit bandwidth in the SSB mode. Values
can be selected from
150 Hz to 3600Hz.
FILTER TX CW
Adjustment of transmit bandwidth in the CW mode. Values
can be selected from
50 Hz to 1000Hz.
FILTER TX AM
Adjustment of transmit bandwidth in the AM mode. Values
can be selected from
200 Hz to 9600Hz.
FILTER TX FM
Adjustment of transmit bandwidth in the FM mode. Values
can be selected from
200 Hz to 9600Hz.
LEVEL TX #
{1234}
DO NOT TOUCH IT.
POWER TX #
{0} {123}
DO NOT TOUCH IT.
TX IQ #
Setting the mirror channel correcting the phase and
amplitude of IQ for each band separately on TX - minimum
reading
–
has two modes- fast and slow for quick setting
and fine
–
switched with STEP.
DO NOT TOUCH IT.
In the rare event that you manage to blow out some or all of the factory presets,
please contact Appello.
The general and unique parameters of your specific radio
(by serial number) must be re-entered manually. This work takes about one hour.
