25
SKY-SDR USER MANUAL Ver. 1.3.1 - 28-MAR-2017
SERVICE MODE Continued:
DO NOT TOUCH ANYTHING in here unless you are 100% sure that you know
what you are doing. Otherwise you may easily kill the radio’s
performance.
GENERAL INFORMATION ABOUT SERVICE MODE
Each time you "
ENABLE ENTERING SERVICE MODE"
(
by pressing
[F]
while
powering on the radio
)
most parameters are automatically reset to their DEFAULT
VALUES:
DEFAULT
VALUES
VFO = {12345678} (Unit-Specific;
DO NOT TOUCH IT!
)
S-METR = {xx} (Unit-Specific;
DO NOT TOUCH IT!
)
IF DSP = {5149} (firmware-specific value -
DON'T
TOUCH!
)
FILTER TX CW = 100
FILTER TX FM = 9600
FILTER TX AM = 5590
Vpwr = 0
CAT - FTDI FT232RL
BAND-SPECIFIC PARAMETERS
Several parameters must be set separately for EACH BAND. There are 11 different
bands. You must select the band BEFORE entering the Service Menu. You must
also exit the Service Mode Menu in order to change bands. When exiting and re-
entering, don't forget to press
[F]
then
[MENU].
The current BAND is indicated by
a number following the name of the menu item. (i.e. Port 3 means Port for BAND
3). The band specific Menu items are shown below with "
#
" to indicate that a band
number will be shown. The list below shows you the band number of each band.
BAND #
0 = 160m 4 = 30m 8 = 12m
1 = 80m 5 = 20m 9 = 10m
2 = 60m 6 = 17m 10 = 6m
3 = 40m 7 = 15m
