10
www.aerex.de
Reco-Boxx ZXR / ZXA / Flat – Operation and maintenance instructions
[03/
2022 ]
Reco-Boxx ZXR
Reco-Boxx Flat-OUT
Reco-Boxx Flat-H
Reco-Boxx ZXA
1, 2 and 3 must be installed by a qualified electrician
Note: internal electrical coils, motorised dampers, internal fan-pressure sensors, flexible connections
and slip-clamps must ordered and are all pre-installed and factory wired. The internal heating water-coil
accessory is pre-installed, but must be connected, hydraulically and electrically, by the installer.
1.
Main switch for power supply AHU
2.
Main switch for power supply electrical coils
(both internal pre-hating and post-heating)
3.
Electrical cabinet
4.
Supply fan
5.
Extract fan
6.
DDM-Set for CA-airflow measurement (option)
7.
Outdoor air filter (bag or pleated)
8.
Extract air filter (bag or pleated)
9.
Heat exchanger
10.
Modulating 100% bypass
11.
Drain pan and drain pipe
NOTE: Illustrations show right-hand version (-R);
Left versions (-L) are mirror images.
12.
Preheating coil (accessory for
Counterflow-equipments)
13.
Internal post-heating water or electrical coil
(accessory)
14.
Motorised damper (accessory)
15.
Motorised damper (accessory))
16.
Access panel (Flat only)
17.
Flexible sleeve (accessory)
18.
Slip clamp (accessory)
19.
Water connection for post-heating (accessory)
20.
Box I/O (inlet / outlet)
21.
Additional feet 205 mm (accessory)
22.
Protection cover
