20/22
TF5774_C
Aereco S.A.
MAINTENANCE
PRIOR WARNINGS
Before doing any work on the appliance:
Cut off the power.
Wait at least 5 min after cutting off the power supply before intervention on the appliance.
The appliance may still be charged even though the 230 V~ power supply circuit has been cut off, leading
to a risk of electrical shocks.
It is recommended to use some gloves to move the product (some metallic parts of the product can
be sharp).
The appliance may be stopped but restarts automatically (for example if there is a momentary interruption
in the control circuit of the MS version), with a risk of injury.
➔
Never insert anything through the fan, and in particular the suction stream in which the turbine
is located.
➔
Never handle an appliance or remove it from its stack when it is connected.
➔
Cut off the power supply and make sure that it cannot be reconnected.
➔
Wait for the turbine to come to a full stop.
MAINTENANCE AND CLEANING
We recommend carrying out a visual observation of the proper operation of each fan once a year
and if necessary
cleaning its blades.
1)
Cut the plastic clips that secure the access hatch to the
fixed part of the fence.
DO NOT CUT the metallic staple linking the access hatch to
the support.
2)
Open to clean the inside of the fan.
3)
Close the access hatch and put some new plastic clips
.
