6 / 36
TF6746_A_NOT_DXA230_REFERENCE
Aereco S.A.
Dimensions of DXA Unit (mm)
2.2. CONSTRUCTION / DIMENSIONS
DXA Unit 230 m
3
/h – Heat recovery unit
See the characteristics of the DXA Unit system on page 33
·Envelope in EPP.
·2 low energy consumption fans driven by EC (electronic commutation) motors (supply air and
exhaust air).
·2 F7 anti pollen filters for the fresh air.
·G4 filter for the exhaust to protect fans and the exchanger.
·Continously checking of filter clogging, and warning for filter change.
·Very high efficiency heat exchanger with plastic plates, washable.
·Intelligent electronic control unit of the heat recovery, with integrated control interface.
·Integrated bypass and free-cooling automatically controlled.
ø160
ø160
88
248 151
155
1189
240
R2,50
80
1184
130
545
40
482
545
138
118
151
R80
248
155
554
R80
101
2.3. DXA ASSEMBLING
When delivered, the DXA Unit is furnished with 4 lipseals spigots.
Before removing the 4 plastic caps, pull out carefully the staples with
a screwdriver to not dammage the EPP material. No need to seal the
spigots once they are pushed in the inlets and outlets of the DXA, the
lipseals make it already airtight.
Assembling of the DXA spigots
