Aereco DXA 230 EXCELLENCE, Инструкция по установке и обслуживанию

Страница: 7 / 40

7 / 40
TF6401_E Aereco S.A.
2.3. DXA ASSEMBLING
When delivered, the DXA Unit is furnished with 4 lipseals spigots.
Before removing the 4 plastic caps, pull out carefully the staples
with a screwdriver to not dammage the EPP material. No need to
seal the spigots once they are pushed in the inlets and outlets of
the DXA, the lipseals make it already airtight.
Assembling of the DXA spigots
Dimensions of DX Hub 5 (mm)
Dimensions of DX Hub 6 (mm)
118
151
622
577
31,5
21,5
DN 100 DN 125 DN 100 DN 160
433
200 DN 100
100
100
468 494 520
546 DN 13
DN 160
151
100
755
124
280
100
129
200
114
636
636 685
695
78 134
254
340
Ø158
Ø158
695
773
126
685
DN75 105
Ø13
DX Hub – Distribution box for demand controlled supply airflows
·DX Hub 5 : 5 outlets in DN100 + 1 outlet for balanced airflows in DN125
·DX Hub 6 : 6 outlets in DN75. Outlets n°5 and n°6 are dedicated to living room airflows only and modulate both at the same time according to the
living room electronic sensor.
·Envelope in galvanised steel.
·Dampers for supply airflows, driven by sensors (Presence or CO
2
) for each room.
·Damper for balanced airflows (specific to DX Hub 5)
The distribution box (DX Hub) coupled to the exhaust compensation valve enables the balance between supply and exhaust airflows.