MFC Series Boilers Installation Manual
SECTION 6:
Drain & Condensate Piping Assembly
6.1 Boiler Drain Piping Assembly
The boiler drain piping is laid out and assembled as shown in Figure 6-1. Note that the piping
configuration must be angled and then aligned for where the notch in the Stainless Steel 4th
Pass will be located once it is assembled to the boiler.
Figure 6-1: Boiler Drain Assembly and Configuration
MEASURE THIS DIMENSION
ON THE STAINLESS STEEL
4
th
PASS
BOILER DRAIN ASSEMBLY PARTS
NOTE:
Assemble drain assembly as shown and attach
to boiler at angle indicated BEFORE performing any
other assembly tasks.
CONDENSATE
DRAIN PIPING
DRAIN
PIPING FROM
BOILER
NOTCH FOR
BOILER DRAIN
BOILER WITH DRAIN
PIPING INSTALLED AT
ANGLE TO MATCH
DIMENSION BELOW
STAINLESS STEEL 4
th
PASS (REAR VIEW)
BOILER (REAR VIEW)
Page
10
of
32
AERCO International, Inc.
•
100 Oritani Dr.
•
Blauvelt, NY 10913
OMM-0108_0A
12/15/2015
Ph.: 800-526-0288
GF-146-IN
