20
21
GB
USE OF ACCESSORIES
USE OF ACCESSORIES
CAUTION!
To avoid inadvertently pressing the steam delivery
button while changing accessories, the device must
be always switched off and unplugged! Since the
device parts remain very hot due to the hot steam,
allow these to cool for about 5 minutes before
changing the parts!
Use of the handle without accessories
The handle can be used without additional
accessories to steam surfaces and objects.
Application area::
• Removing creases from textiles. To do so, steam
the textiles from a distance of approx. 30 cm.
• Steam dusting. To do so, apply steam to a
duster for a short time and then use the latter to
wipe off the surfaces to be cleaned.
Use of the floor wiper
The floor wiper is designed to clean heat- and
damp-proof floor coverings, including e.g.:
• Cleaning of stone, tiled and PVC floors.
• Cleaning of sealed wooden and parquet
flooring.
The floor wiper can be attached to the handle using
the two extension pipes.
• To connect the extension pipes together and
with the handle, press the adjustment knob so
that both parts can be fitted together.
• Insert the extension pipe into the adapter piece
of the floor wiper.
• If the adapter piece becomes detached from the
floor wiper, reinsert the former into the opening.
Be careful when doing so to ensure that the flat
section of the nozzle must be directed toward
the side of the frame with the measuring stick.
After inserting, turn through 90°.
• To remove the parts, repeat the previous steps
in reverse, i.e. by pressing the adjustment knob
and disengaging the parts from each other
again.
30777-English_2 .indd 21
27/2/07 9:28:47 AM