background image

5

3. Controls and Connections

Note: 24V power supply

The included 24VDC power supply is a certified wide-range 
model, capable of handling input voltages between 100V 
and 240V. A substantial amount of research, effort and tes-
ting went into the selection of this power supply. It is critical 
to the function of the preamp – please use no other power 
supply!
Also please bear in mind that any device powered from a po-
wer supply (as opposed to battery opera-tion), may suffer in-
terference carried by the electricity supply itself. To avoid this, 
always try and keep signal cables as short as possible.
We have opted for a “non-earthed power supply“ (class 2 with 
protective insulation) in order to avoid unwanted earth or 
ground loops that occur when using seve-ral earthed mains 
powered devices in a signal chain.

4. Operation Summary

4.1 Cabling and Starting-up

Before connecting to the mains, please ensure that your lo-
cal mains voltage (e.g. 230V in mainland Europe, 120V in the 
USA) is suitable for the voltage input range of the included 
power supply. The relevant specs and safety symbols are 
printed on the rear side of the unit.

Please ensure that 

gain

- and 

level

-controls are in their midd-

le position (centre detent) and all other controls are turned 
all the way to left. The pushbuttons should be off, i.e. not pu-
shed.
Make all signal cable connections as desired (e.g. output of 
upstream device to 

input, line out

 to input of downstream 

device). Now you can connect the unit to the power supply. 
The green 

power

 control LED indicates operational readiness.

Top side 

gain 

 

input level control

 clip

  

overload indicator

phase 

 

phase invert switch

bypass 

bypass switch with indicator light

    

      = not active          = active

eq one / eq two
 level 

level control

 bandwidth 

filter bandwidth control

 frequency

 

filter frequency control

 f1/f2 

filter frequency range switch

Front side

input    

signal input, 6,3 mm mono jack socket

power  

on/off-status indicator

Rear side

line out

 

signal output, 6,3 mm mono jack socket

dc 24 V  

power supply connector socket (24 Volt DC)

Содержание DUAL-PARA EQ













Отзывы: