AER AK15 plus, Руководство по установке

Страница: 11 / 12

11
How to react:
If you don’t have a luthier at hand, go through
the following steps.
Assuming the installation of the saddle is
correct, all surfaces even and straight and the
pickup is working properly, you can add layers
of scotch tape to the saddle at weak positions
to increase the pressure on relevant crystals.
Sounds simple, but needs a little experience as
all piezos are connected and a change of one
factor may have effect on others too. To find
the proper balance may require a little extra
time and work which is annoying for everyone
– especially the installer – but it has to be done
– no way around it!
In general
We have designed the AK15 plus system to
produce the clearest and most dynamic sound
possible. This high dynamic output means that
your battery life will be less long than with oth-
er mainstream systems. The rewards however
outweigh the use of an extra battery.
The
AK15 plus system can be used without any
batteries when using the 9 Volt phantom power
of the AER
Compact
60/4 or
Domino
3 ampli-
fier. Most of our other amplifiers can be easily
modified to provide 9 Volt phantom power
on the jack input. Check your manual for this.
Phantom power needs a standard stereo jack
cable connection. Our high output volume is
suited for all amplification systems.
Good sound is an inspiration for life.
We hope we can contribute to this with the
AK15 plus .