Parameter 80: To set which notification would be sent to the associated devices (Group 1)
To set which notification would be sent to the associated devices (Group 1) when the state of Nano Dimmers
load is changed.
Size: 1 Byte, Default Value: 0
Setting
Description
0
Send Nothing
1
Send Hail CC
2
Send Basic CC report
3
Send Multilevel Switch report
4
Send Hail CC when using the manual switch to change the load state.
Parameter 81: To set which notification would be sent to the associated nodes in association group 3
To set which notification would be sent to the associated nodes in association Group 3 when using the external
switch 1 to switch the loads.
Size: 1 Byte, Default Value: 1
Setting
Description
0
Send Nothing
1
Send Basic Set CC
Parameter 82: To set which notification would be sent to the associated nodes in association group 4
To set which notification would be sent to the associated nodes in association Group 4 when using the external
switch 2 to switch the loads.
Size: 1 Byte, Default Value: 1
Setting
Description
0
Send Nothing
1
Send Basic Set CC
Parameter 83: Configure the state of LED
Configure the state of LED when it is in 3 modes
Size: 1 Byte, Default Value: 0
Setting
Description
0
The LED will follow the status (on/off) of its load (Energy mode).
256 - 316
The hour value of ON time
2
Night light mode.
Parameter 84: ON/OFF time
Set the ON/OFF time of the LED when it is in Night light mode.
Size: 4 Byte, Default Value: 524306
Setting
Description
0 - 60
The minute time of OFF
256 - 316
The hour time of OFF
65536 - 65596
The minute time of ON
