Aeotec Nano Switch, Руководство пользователя

Страница: 4 / 18

2 31
(Front)
Action Button
Touch panel connection port
RGB LED
RF antenna
Fastening screws
Familiarize yourself with your Nano
Switch.
2
(Back)
(Bottom)
Wire connection
port
to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consul the dealer or an experienced radio/TV
technician for help.
UL NOTICE (For USA).
Install only in a UL listed junction box sized
3×2×2.75 inch (75×50×70 mm) or larger,
minimum volume 14 in (230 cm ).
Use Copper Conductors Only.
“CAUTION – Risk of Electric Shock – More than
one disconnect switch may be required to de-
energize the equipment before servicing”.
“WARNING - This device shall not be used in
combination with a wall switch controlling a
receptacle.” 1.
2.
3.
4.
3 3