4.
Choose Brand "
Aeotec
"
5.
Select "
Camera
"
6.
Tap "
Start
" then plug your Aeotec Cam 360 within range of your WiFi Router.
7.
Scan the QR code
on Aeotec Cam 360.
8.
Once SmartThings Connect discovers the device, choose its
Room
and
Location
.
9.
Tap
Next
.
10.
Select a WiFi Network for Aeotec Cam 360 and enter the security password.
Other Functions
Factory Reset
If you are having issues connecting Cam 360 to SmartThings Connect, use factory reset following
the steps outlined below:
1.
Hold the reset button located on the back of Cam 360 for 3 seconds
2.
Release the reset button (as soon as the LED begins blinking
blue
)
3.
The speaker will sound "The camera is booting, please wait" to confirm that it is factory
reset
4.
Once the LED begins blinking
amber
, the Cam 360 is factory reset and ready to be paired
following the pair steps above.
WiFi Signal Strength
This function in SmartThings Connect will allow you to check the signal strength between your WiFi
Router and Aeotec Cam 360. This should be used if your Cam 360 becomes unavailable.
1.
Select
Cam 360
in SmartThings Connect
2.
Tap
More Options (3 dot icon)
located top right corner.
3.
Tap "
Check WiFi signal strength
"
