9
4.2 Trigger the Aeon Labs D/W Sensor with the magnetic unit
3 times in quick succession.
4.3 Send a Z-Wave sleep command (Z-Wave Wake Up
Command Class) from your controller/gateway to the Aeon
Labs D/W Sensor.
4. Put the Aeon Labs D/W Sensor to Sleep
After Being Included into a Z-Wave Network
4.1 Firmly tap the security switch on the back of the Aeon Labs
D/W Sensor 3 times in quick succession.
The Aeon Labs D/W Sensor may be put to sleep by any of the
following methods below. Once the Aeon Labs D/W Sensor
has been put to sleep, the LED will no longer blink indicating
that it is now asleep and saving battery life.
