AENO AEK0007S, Руководство пользователя

Страница: 8 / 122

8 aeno.com/documents

Wait until the message "Device added successfully” appears.
Note: The device can also be controlled via voice assistants. Detailed
information is available in the Installation and Operation Manual at
aeno.com/documents. If the connection fails, make sure the device is
connected to a power source and turned on, check the Wi-Fi router settings
at https://aeno.com/router-help, remove the kettle from the stand, put it
back on the stand, and then repeat the connection process.
Descaling
Frequency: Once a month (hard and very hard water) or once every 2–3
months (water of medium hardness or soft) when using the kettle 3–5 times a
day.
Limescale remedies and cleaning methods
Table vinegar Citric acid Special descale
Pour 0.5 l of vinegar
(6 % or 9 %) into the
kettle, leave for 1 h
without boiling. Pour
out the contents,
wash the kettle and
boil and drain the
water 5–6 times.
Boil 0.5 l of water. Add
25 g of citric acid and
leave for 15 min. Pour
out the contents, wash
the kettle and boil and
drain the water 5–6
times.
Follow the
manufacturer's
instructions on the
package
Troubleshooting

The device does not turn on. Possible cause: There is no power coming
from the power outlet. Solution: Test the outlet by plugging another device
into it.

The kettle switches off a few seconds after it is switched on. Possible cause:
low water level in the kettle. Solution: Turn off and unplug the device. Wait
for the kettle to cool down and follow the instructions under "Boiling" in
the "Operating the device" section.