DM482e User Manual
AEMULUS
14
7
Pin Electronics (PE):
Generic Setting:
a
DPIN Force
Sets the operation mode:
Mode
Description
VECTOR
Vector engine
DIO
General purpose I/O
CLOCK
Drive clock signal
INVERTED_CLOCK Drive inverted clock
signal. This is when 2 pins
are selected as differential
outputs
b
DPIN Level
Set the levels for each pin.
c
DPIN On
Turn on/off the selected pin.
d
DPIN PE Attribute
Enable/disable active load and input termination
Vector:
a
DPIN Period
Specifies the timing set to be used, as well as its
period setting
b
DPIN VecLoad
Load the specified vector set in the vector file to
the module
c
DPIN RunVec
Run the specified vector set.
Clock/Invert Clock:
a
Configure Clock
Frequency
Configure the clock frequency when mode
“CLOCK” or “INVERTED_CLOCK” is selected.
DIO:
a
Set Pin Direction
Specifies the direction of the selected pin.
b
Set Port Direction
Specifies the direction of the selected pin group.
