Digital Thermometer Model K2000F and Temperature Probe Model ST2-2000
7
4. OPERATION
• Select the range required: up to +200°F or +2000°F for Model K2000F
or select mV input for Model ST2-2000.
• Make sure that the sensor connected is suitable for the measurement
about to be taken.
• Position the sensor at the point of measurement.
• Wait a few seconds for the sensor to stabilize (refer to sensor response
time in Section 6).
• Check the reading when the indication settles.
The body of the thermometer must be kept within the temperature
range 32°F to 122°F (0°C to +50°C).
5. BATTERY REPLACEMENT
• The 9V battery is accessible through the back of the instrument.
• Unscrew and remove the rear half of the case.
• Replace the battery and put the case back together.
Always disconnect the sensor from the thermometer before open-
ing the case.