AC/DC Current Probe Model J93
13
5. MAINTENANCE
Use only factory specified replacement parts. AEMC
®
will not be held responsible
for any accident, incident, or malfunction following a repair done other than by its
service center or by an approved repair center.
5.1 Warning
■
To ensure optimum performance, it is important to keep the probe jaw mating
surfaces clean at all times. Failure to do so may result in error in readings.
■
To avoid electrical shock, do not attempt to perform any servicing unless you
are qualified to do so.
■
Do not perform any service while the current probe is on any circuit.
■
To avoid electrical shock and/or damage to the instrument, do not get water or
other foreign agents into the electronic module.
5.2 Cleaning
Disconnect the instrument from any source of electricity.
■
Use a soft cloth, dampened with soapy water. Rinse with a damp cloth and
immediately dry with a dry cloth.
■
Do not use alcohol, solvents, or hydrocarbons.
■
Do not splash water directly on the instrument.
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412
