AEMC instruments 6550 Скачать руководство пользователя страница 6

Megohmmeter Models 6550 & 6555 - Quick Start Guide

   Precautions Before Use

This instrument and its accessories comply with safety standards IEC/EN 61010-2-030 

or BS EN 61010-2-030 and IEC/EN 61010-031 or BS EN 61010-031 for voltages 

of 1000 V in Category IV. Failure to observe the safety instructions may result in 

electric shock, fire, explosion, and destruction of the instrument and installations.

 

The operator and/or the responsible authority must carefully read and 

clearly understand the various precautions to be taken in use. Sound 

knowledge and a keen awareness of electrical hazards are essential when 

using this instrument.

 

If the instrument is used other than as specified, the protection it provides 

may be compromised, thereby endangering you.

 

Do not use the instrument on networks of which the voltage or category 

exceeds those mentioned.

 

Do not use the instrument if it seems to be damaged, incomplete, or poorly 

closed.

 

Before each use, check the condition of the insulation on the leads, 

housing, and accessories. Any item of which the insulation is deteriorated 

(even partially) must be set aside for repair or scrapping.

 

Use only the leads and accessories supplied. Using leads (or accessories) 

of a lower voltage or category reduces the voltage or category of the 

combined instrument and leads (or accessories) to that of the leads (or 

accessories).

 

Use personal protection equipment systematically.

 

Keep your hands away from the terminals of the instrument.

 

When handling the leads, test probes, and alligator clips, keep your fingers 

behind the physical guard.

 

As a safety measure, and to avoid interference, do not move and do not 

handle the leads during measurements.

Charging the Battery

Fully charge the battery before the first use.

Charging must be conducted at a temperature between (32 and 86) °F  

(0 and 30) °C.
The batteries automatically begin charging when the instrument is connected to 

AC power.
Only use the supplied AC power adapter to charge the batteries.

NOTE: 

A full charge of a completely discharged battery takes 

approximately 6 to 10 h.

Содержание 6550













Отзывы: