P/N 30-2500
AQ-1 DATA LOGGER
AEM Performance Electronics, 2205 126th Street Unit A, Hawthorne, CA 90250 - Phone: (310) 484-2322
http://www.aemelectronics.com
STOP! - READ THIS BEFORE INSTALL OR USE!
WARNING:
THIS INSTALLATION MAY REQUIRE WELDING OR INTEGRATION INTO A VEHICLE'S ELECTRICAL SYSTEM. DAMAGE
TO SENSITIVE ELECTRONICS, FIRE, OR EXPLOSION MAY OCCUR IF PROPER PRECAUTION IS NOT TAKEN. IF THERE
IS ANY DOUBT,
DO NOT
ATTEMPT THE INSTALLATION AND CONSULT A PROFESSIONAL.
NOTE
: IT IS THE RESPONSIBILITY OF THE ENGINE TUNER TO ULTIMATELY CONFIRM THE CALIBRATION USE FOR
ANY PARTICULAR ENGINE IS SAFE FOR ITS INTENDED USE. AEM HOLDS NO RESPONSIBILITY FOR ANY ENGINE
DAMAGE THAT RESULTS FROM THE MISUSE OF THIS PRODUCT.
Instruction
Manual
The AEM AQ-1 Data Logger is the ideal entry level data logger for virtually all forms of racing and Motorsports because it
installs easily, can read live parameters from ancillary sensors, AEMnet enabled devices, GPS and more, and put them
into a single log make your data easy to view. Whether you race a late model EFI-equipped OR carbureted vehicle, the
AQ-1 is the ideal solution for your data acquisition needs.
Features
·
Four (4) 0-5VDC Analog Inputs with software
selectable 2.2k pull-up resistor
·
Four (4) 0-16.5VDC Analog / Frequency Inputs
·
Three (3) Digital (Switch to Ground, 16V Max) Inputs
·
Serial (RS-232) Input (AEM EMS / NMEA0183 GPS
Only)
·
AEMnet (CAN) Input (AEMnet Devices Only)
·
3-axis Internal Acceler/- 4g
·
1000Hz Maximum Logging Rate
·
EnviroSeal Boot / Sealed Connector
·
2 GB SD Card (Supports up to 32GB)
·
AQ-1 Data Acquisition System Configuration Software
(USB)
·
AEMdata Analysis Software
PN
Description
35-2500
DATA LOGGER MODULE
35-5603
DATALOGGER ENVIROSEAL
35-3008
USB A-B CABLE
1-2059
NUT, 6-32 NYLOCK STAINLESS (4)
1-2047
SCREW,PAN HD 6-32x1-1/4 SS (4)
10-2500
INST, AQ-1
Optional
PN
Description
30-2906-96
HARNESS, AQ1
